@James and Deepak
There is an error on that fuse test text in mooshi-manual.. “Figure 8” below it is right, so you need to measure between A and OHM. And in my opinion, that straight line from ohm to A may be misleading at first sight and wider loop of test lead around the meter (with maybe couple of knots ;) ) would be closer to real life and we might understand what it tries to show :D
I was too quick to come up with my own solution and told you to measure some voltage, that resistance measuring is of course the right way to do it.
So i can’t yet tell if that fuse is blown or not, as i don’t know which one of those instructions has been used..