Home › Forums › Mooshimeter Support › Cannot communicate with Moosimeter, LED flash pattern quesiton › Reply To: Cannot communicate with Moosimeter, LED flash pattern quesiton
An update, this seems to be partially self induced.
Here is what went on before I lost connectivity to the meter.
I installed the Moosi App on an iPad in the house because I wanted to compare the iProduct to the Android. I shut down my Android App and then installed the App on the iProduct and connected up to the iProduct without problem or incident.
The problem was when I then wanted to move back to the Android, it can see the meter but cannot reconnect.
I have tried almost everything I can think of. Made sure the App was closed on the iProduct. Removed the batteries from the meter, used the button to reset the meter, forced the meter into Shipping Mode, turned off the Bluetooth on the iProduct, restarted the Android.
For some reason the meter seems to still be married to the iProduct. Almost like an Arpcache type of problem.
I am getting either a Initial Error -1 or a 133 error.
So what I finally did to regain connectivity on the Android is from the iProduct, I put the meter in Shipping Mode, I closed the App on the iProduct, I then turned off the Bluetooth on the iProduct. Then I woke up the meter and attempted to reconnect with the Android and it finally did reconnect.
Unclear if there is something going on with the iProduct and the Bluetooth that keeps the connection even though the App was closed??
I will try to reproduce the situation and try to get a better understanding of what is going on.
Curious if anyone else has seen this type of behavior?
j