Hi James, quick follow up regarding firmware upgrade.

I was able to get the timing right and start the upgrade. The first attempt ran at the new 8x speed until what appeared to be the very last packet at which point the progress stopped and the meter seemed to be back in bootloader mode. I let it sit there for about ten minutes and it was still stuck. I pressed the “Cancel” button on the GUI and the application reset to “Start Programming”. I pressed the “Start Programming” and the upload started this time in what seemed like the original slow mode, approximately 600 seconds worth of estimated time. I walked away for a bit and when I came back the meter had successfully upgraded the firmware and was in normal mode.

I snapped a picture of the phone as it was in the stuck mode if it would help. Looking at the total bytes and completed bytes I am guessing it was stuck at what seems like the last packet. Let me know if you want to see this and I will upload the picture somewhere.

The meter is fine now and has new firmware. I can see it with the latest Android App from both the LG G4 that I used to upgrade the firmware and the Samsung Note 10.1 with Android 4.4.

One more thing. The App crashed once after the firmware update after disconnecting and exiting using the menu option. I submitted a crash report for that but I did not see another crash so far.

Thanks again!