Home › Forums › Mooshimeter Support › Case won't close after inserting SD card
- This topic has 1 reply, 2 voices, and was last updated 4 years, 11 months ago by
Anonymous.
Viewing 1 reply thread
- AuthorPosts
Anonymous
InactiveI put an SD card into the Mooshimeter. Not the case won’t close. Are there different lengths on the SD cards? This one is pushed in all the way. It is recognized and I can turn on logging. It appears to stick out too far for the case to close.
Thanks,
DocfxitAnonymous
Inactivehello
you are not alone with this problem. I sent an email to the support about this (and other things)but never had any reply.
When I was closing the case, it was pushing on the card like when you want to eject. I tested different brands but same results.
I was obliged to cut the box and now I can also insert the card from outside without opening the box but say goodbye to waterproofing!
regards,
eric
- AuthorPosts
Viewing 1 reply thread