Home › Forums › Mooshimeter Support › Periodic offset shift on dc curent logging
- This topic has 1 reply, 2 voices, and was last updated 6 years, 9 months ago by
admin.
- AuthorPosts
Nicolai Frost
GuestHi I’m having problems with logging relative low currents for extended periodes.
I’m measuring currents in the range of 0.0038 Amps over a periode of 1-3 days with logging every 10s, test i ran in december 21. had no problem but here in January mooshimeter is inducing a strange current offset in the data roughly every 12-13 hours.I am also using the voltage channel to measure a voltage at the same time but here I dont seen any periodic spike. So I can conclude that the periodic DC amps offset does not come from any outside influences such as fluctuations in the powersurply or the temperature.
My thinking is that it is due to some problem in the latest firmware.
admin
KeymasterHi Nicolai,
Sorry I didn’t get to this quickly. Just trying to understand the issue: Is it a single erroneous reading every 12 hours? Or does all the data shift?
ie. does it go 1, 1, 1, 1, 2, 1, 1, 1
or 1, 1, 1, 1, 2, 2, 2, 2If it’s cyclical, I would bet it’s a slight change in the circuit gain due to temperature. If the voltage channel is close to zero, you would not notice a change in gain on that channel.
- AuthorPosts